M40 × 3 Metric Thread Dimensions
Nominal diameter 40 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 38.051 mm. Basic minor diameter: 36.752 mm. Basic major diameter: 40 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40 | Not specified |
| Pitch | 38.051 | 38.221 |
| Minor | 36.752 | 37.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40.048 | Not specified |
| Pitch | 38.099 | 38.311 |
| Minor | 36.8 | 37.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40 | Not specified |
| Pitch | 38.051 | 38.263 |
| Minor | 36.752 | 37.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40.048 | Not specified |
| Pitch | 38.099 | 38.364 |
| Minor | 36.8 | 37.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40 | Not specified |
| Pitch | 38.051 | 38.316 |
| Minor | 36.752 | 37.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40.048 | Not specified |
| Pitch | 38.099 | 38.434 |
| Minor | 36.8 | 37.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40 | Not specified |
| Pitch | 38.051 | 38.386 |
| Minor | 36.752 | 37.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40.048 | Not specified |
| Pitch | 38.099 | 38.524 |
| Minor | 36.8 | 37.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40 | Not specified |
| Pitch | 38.051 | 38.476 |
| Minor | 36.752 | 37.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.577 | 39.952 |
| Pitch | 37.803 | 38.003 |
| Root d3 | 35.955 | 36.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.577 | 39.952 |
| Pitch | 37.878 | 38.003 |
| Root d3 | 36.03 | 36.271 |
Cutting tap preparation
Pre-drill recommendation: 37 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 38.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.