M40 × 2.5 Metric Thread Dimensions
Nominal diameter 40 mm; pitch 2.5 mm.
Basic geometry
Basic pitch diameter: 38.376 mm. Basic minor diameter: 37.294 mm. Basic major diameter: 40 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40 | Not specified |
| Pitch | 38.376 | 38.526 |
| Minor | 37.294 | 37.574 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40.042 | Not specified |
| Pitch | 38.418 | 38.608 |
| Minor | 37.336 | 37.691 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40 | Not specified |
| Pitch | 38.376 | 38.566 |
| Minor | 37.294 | 37.649 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40.042 | Not specified |
| Pitch | 38.418 | 38.654 |
| Minor | 37.336 | 37.786 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40 | Not specified |
| Pitch | 38.376 | 38.612 |
| Minor | 37.294 | 37.744 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40.042 | Not specified |
| Pitch | 38.418 | 38.718 |
| Minor | 37.336 | 37.896 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40 | Not specified |
| Pitch | 38.376 | 38.676 |
| Minor | 37.294 | 37.854 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40.042 | Not specified |
| Pitch | 38.418 | 38.793 |
| Minor | 37.336 | 38.046 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40 | Not specified |
| Pitch | 38.376 | 38.751 |
| Minor | 37.294 | 38.004 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.623 | 39.958 |
| Pitch | 38.154 | 38.334 |
| Root d3 | 36.614 | 36.891 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.623 | 39.958 |
| Pitch | 38.222 | 38.334 |
| Root d3 | 36.682 | 36.891 |
Cutting tap preparation
Pre-drill recommendation: 37.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 38.9 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.