M40 × 2 Metric Thread Dimensions
Nominal diameter 40 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 38.701 mm. Basic minor diameter: 37.835 mm. Basic major diameter: 40 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40 | Not specified |
| Pitch | 38.701 | 38.841 |
| Minor | 37.835 | 38.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40.038 | Not specified |
| Pitch | 38.739 | 38.919 |
| Minor | 37.873 | 38.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40 | Not specified |
| Pitch | 38.701 | 38.881 |
| Minor | 37.835 | 38.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40.038 | Not specified |
| Pitch | 38.739 | 38.963 |
| Minor | 37.873 | 38.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40 | Not specified |
| Pitch | 38.701 | 38.925 |
| Minor | 37.835 | 38.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40.038 | Not specified |
| Pitch | 38.739 | 39.019 |
| Minor | 37.873 | 38.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40 | Not specified |
| Pitch | 38.701 | 38.981 |
| Minor | 37.835 | 38.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40.038 | Not specified |
| Pitch | 38.739 | 39.094 |
| Minor | 37.873 | 38.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 40 | Not specified |
| Pitch | 38.701 | 39.056 |
| Minor | 37.835 | 38.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.682 | 39.962 |
| Pitch | 38.493 | 38.663 |
| Root d3 | 37.261 | 37.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.682 | 39.962 |
| Pitch | 38.557 | 38.663 |
| Root d3 | 37.325 | 37.508 |
Cutting tap preparation
Pre-drill recommendation: 38 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 39.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.