M39 × 4 Metric Thread Dimensions
Nominal diameter 39 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 36.402 mm. Basic minor diameter: 34.67 mm. Basic major diameter: 39 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39 | Not specified |
| Pitch | 36.402 | 36.592 |
| Minor | 34.67 | 35.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.06 | Not specified |
| Pitch | 36.462 | 36.698 |
| Minor | 34.73 | 35.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39 | Not specified |
| Pitch | 36.402 | 36.638 |
| Minor | 34.67 | 35.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.06 | Not specified |
| Pitch | 36.462 | 36.762 |
| Minor | 34.73 | 35.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39 | Not specified |
| Pitch | 36.402 | 36.702 |
| Minor | 34.67 | 35.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.06 | Not specified |
| Pitch | 36.462 | 36.837 |
| Minor | 34.73 | 35.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39 | Not specified |
| Pitch | 36.402 | 36.777 |
| Minor | 34.67 | 35.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.06 | Not specified |
| Pitch | 36.462 | 36.937 |
| Minor | 34.73 | 35.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39 | Not specified |
| Pitch | 36.402 | 36.877 |
| Minor | 34.67 | 35.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 38.465 | 38.94 |
| Pitch | 36.118 | 36.342 |
| Root d3 | 33.654 | 34.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 38.465 | 38.94 |
| Pitch | 36.202 | 36.342 |
| Root d3 | 33.738 | 34.033 |
Cutting tap preparation
Pre-drill recommendation: 35 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 37.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.