M39 × 2 Metric Thread Dimensions
Nominal diameter 39 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 37.701 mm. Basic minor diameter: 36.835 mm. Basic major diameter: 39 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39 | Not specified |
| Pitch | 37.701 | 37.841 |
| Minor | 36.835 | 37.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.038 | Not specified |
| Pitch | 37.739 | 37.919 |
| Minor | 36.873 | 37.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39 | Not specified |
| Pitch | 37.701 | 37.881 |
| Minor | 36.835 | 37.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.038 | Not specified |
| Pitch | 37.739 | 37.963 |
| Minor | 36.873 | 37.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39 | Not specified |
| Pitch | 37.701 | 37.925 |
| Minor | 36.835 | 37.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.038 | Not specified |
| Pitch | 37.739 | 38.019 |
| Minor | 36.873 | 37.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39 | Not specified |
| Pitch | 37.701 | 37.981 |
| Minor | 36.835 | 37.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.038 | Not specified |
| Pitch | 37.739 | 38.094 |
| Minor | 36.873 | 37.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39 | Not specified |
| Pitch | 37.701 | 38.056 |
| Minor | 36.835 | 37.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 38.682 | 38.962 |
| Pitch | 37.493 | 37.663 |
| Root d3 | 36.261 | 36.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 38.682 | 38.962 |
| Pitch | 37.557 | 37.663 |
| Root d3 | 36.325 | 36.508 |
Cutting tap preparation
Pre-drill recommendation: 37 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 38.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.