M39 × 3 Metric Thread Dimensions
Nominal diameter 39 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 37.051 mm. Basic minor diameter: 35.752 mm. Basic major diameter: 39 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39 | Not specified |
| Pitch | 37.051 | 37.221 |
| Minor | 35.752 | 36.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.048 | Not specified |
| Pitch | 37.099 | 37.311 |
| Minor | 35.8 | 36.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39 | Not specified |
| Pitch | 37.051 | 37.263 |
| Minor | 35.752 | 36.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.048 | Not specified |
| Pitch | 37.099 | 37.364 |
| Minor | 35.8 | 36.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39 | Not specified |
| Pitch | 37.051 | 37.316 |
| Minor | 35.752 | 36.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.048 | Not specified |
| Pitch | 37.099 | 37.434 |
| Minor | 35.8 | 36.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39 | Not specified |
| Pitch | 37.051 | 37.386 |
| Minor | 35.752 | 36.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39.048 | Not specified |
| Pitch | 37.099 | 37.524 |
| Minor | 35.8 | 36.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 39 | Not specified |
| Pitch | 37.051 | 37.476 |
| Minor | 35.752 | 36.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 38.577 | 38.952 |
| Pitch | 36.803 | 37.003 |
| Root d3 | 34.955 | 35.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 38.577 | 38.952 |
| Pitch | 36.878 | 37.003 |
| Root d3 | 35.03 | 35.271 |
Cutting tap preparation
Pre-drill recommendation: 36 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 37.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.