M300 × 8 Metric Thread Dimensions
Nominal diameter 300 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 294.804 mm. Basic minor diameter: 291.34 mm. Basic major diameter: 300 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300 | Not specified |
| Pitch | 294.804 | 295.104 |
| Minor | 291.34 | 291.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300.1 | Not specified |
| Pitch | 294.904 | 295.279 |
| Minor | 291.44 | 292.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300 | Not specified |
| Pitch | 294.804 | 295.179 |
| Minor | 291.34 | 292.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300.1 | Not specified |
| Pitch | 294.904 | 295.379 |
| Minor | 291.44 | 292.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300 | Not specified |
| Pitch | 294.804 | 295.279 |
| Minor | 291.34 | 292.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300.1 | Not specified |
| Pitch | 294.904 | 295.504 |
| Minor | 291.44 | 292.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300 | Not specified |
| Pitch | 294.804 | 295.404 |
| Minor | 291.34 | 292.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300.1 | Not specified |
| Pitch | 294.904 | 295.654 |
| Minor | 291.44 | 293.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300 | Not specified |
| Pitch | 294.804 | 295.554 |
| Minor | 291.34 | 292.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 299.19 | 299.9 |
| Pitch | 294.349 | 294.704 |
| Root d3 | 289.421 | 290.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 299.19 | 299.9 |
| Pitch | 294.48 | 294.704 |
| Root d3 | 289.552 | 290.085 |
Cutting tap preparation
Pre-drill recommendation: 292 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 296.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.