M300 × 6 Metric Thread Dimensions
Nominal diameter 300 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 296.103 mm. Basic minor diameter: 293.505 mm. Basic major diameter: 300 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300 | Not specified |
| Pitch | 296.103 | 296.368 |
| Minor | 293.505 | 294.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300.08 | Not specified |
| Pitch | 296.183 | 296.518 |
| Minor | 293.585 | 294.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300 | Not specified |
| Pitch | 296.103 | 296.438 |
| Minor | 293.505 | 294.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300.08 | Not specified |
| Pitch | 296.183 | 296.608 |
| Minor | 293.585 | 294.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300 | Not specified |
| Pitch | 296.103 | 296.528 |
| Minor | 293.505 | 294.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300.08 | Not specified |
| Pitch | 296.183 | 296.713 |
| Minor | 293.585 | 294.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300 | Not specified |
| Pitch | 296.103 | 296.633 |
| Minor | 293.505 | 294.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300.08 | Not specified |
| Pitch | 296.183 | 296.853 |
| Minor | 293.585 | 294.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300 | Not specified |
| Pitch | 296.103 | 296.773 |
| Minor | 293.505 | 294.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 299.32 | 299.92 |
| Pitch | 295.708 | 296.023 |
| Root d3 | 292.012 | 292.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 299.32 | 299.92 |
| Pitch | 295.823 | 296.023 |
| Root d3 | 292.127 | 292.559 |
Cutting tap preparation
Pre-drill recommendation: 294 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 297.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.