M300 × 4 Metric Thread Dimensions
Nominal diameter 300 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 297.402 mm. Basic minor diameter: 295.67 mm. Basic major diameter: 300 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300 | Not specified |
| Pitch | 297.402 | 297.638 |
| Minor | 295.67 | 296.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300.06 | Not specified |
| Pitch | 297.462 | 297.762 |
| Minor | 295.73 | 296.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300 | Not specified |
| Pitch | 297.402 | 297.702 |
| Minor | 295.67 | 296.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300.06 | Not specified |
| Pitch | 297.462 | 297.837 |
| Minor | 295.73 | 296.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300 | Not specified |
| Pitch | 297.402 | 297.777 |
| Minor | 295.67 | 296.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300.06 | Not specified |
| Pitch | 297.462 | 297.937 |
| Minor | 295.73 | 296.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300 | Not specified |
| Pitch | 297.402 | 297.877 |
| Minor | 295.67 | 296.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300.06 | Not specified |
| Pitch | 297.462 | 298.062 |
| Minor | 295.73 | 296.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 300 | Not specified |
| Pitch | 297.402 | 298.002 |
| Minor | 295.67 | 296.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 299.465 | 299.94 |
| Pitch | 297.062 | 297.342 |
| Root d3 | 294.598 | 295.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 299.465 | 299.94 |
| Pitch | 297.162 | 297.342 |
| Root d3 | 294.698 | 295.033 |
Cutting tap preparation
Pre-drill recommendation: 296 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 298.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.