M290 × 6 Metric Thread Dimensions
Nominal diameter 290 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 286.103 mm. Basic minor diameter: 283.505 mm. Basic major diameter: 290 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290 | Not specified |
| Pitch | 286.103 | 286.368 |
| Minor | 283.505 | 284.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290.08 | Not specified |
| Pitch | 286.183 | 286.518 |
| Minor | 283.585 | 284.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290 | Not specified |
| Pitch | 286.103 | 286.438 |
| Minor | 283.505 | 284.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290.08 | Not specified |
| Pitch | 286.183 | 286.608 |
| Minor | 283.585 | 284.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290 | Not specified |
| Pitch | 286.103 | 286.528 |
| Minor | 283.505 | 284.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290.08 | Not specified |
| Pitch | 286.183 | 286.713 |
| Minor | 283.585 | 284.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290 | Not specified |
| Pitch | 286.103 | 286.633 |
| Minor | 283.505 | 284.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290.08 | Not specified |
| Pitch | 286.183 | 286.853 |
| Minor | 283.585 | 284.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290 | Not specified |
| Pitch | 286.103 | 286.773 |
| Minor | 283.505 | 284.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 289.32 | 289.92 |
| Pitch | 285.708 | 286.023 |
| Root d3 | 282.012 | 282.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 289.32 | 289.92 |
| Pitch | 285.823 | 286.023 |
| Root d3 | 282.127 | 282.559 |
Cutting tap preparation
Pre-drill recommendation: 284 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 287.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.