M290 × 3 Metric Thread Dimensions
Nominal diameter 290 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 288.051 mm. Basic minor diameter: 286.752 mm. Basic major diameter: 290 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290 | Not specified |
| Pitch | 288.051 | 288.263 |
| Minor | 286.752 | 287.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290.048 | Not specified |
| Pitch | 288.099 | 288.364 |
| Minor | 286.8 | 287.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290 | Not specified |
| Pitch | 288.051 | 288.316 |
| Minor | 286.752 | 287.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290.048 | Not specified |
| Pitch | 288.099 | 288.434 |
| Minor | 286.8 | 287.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290 | Not specified |
| Pitch | 288.051 | 288.386 |
| Minor | 286.752 | 287.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290.048 | Not specified |
| Pitch | 288.099 | 288.524 |
| Minor | 286.8 | 287.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290 | Not specified |
| Pitch | 288.051 | 288.476 |
| Minor | 286.752 | 287.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290.048 | Not specified |
| Pitch | 288.099 | 288.629 |
| Minor | 286.8 | 287.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290 | Not specified |
| Pitch | 288.051 | 288.581 |
| Minor | 286.752 | 287.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 289.577 | 289.952 |
| Pitch | 287.753 | 288.003 |
| Root d3 | 285.905 | 286.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 289.577 | 289.952 |
| Pitch | 287.843 | 288.003 |
| Root d3 | 285.995 | 286.271 |
Cutting tap preparation
Pre-drill recommendation: 287 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 288.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.