M290 × 4 Metric Thread Dimensions
Nominal diameter 290 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 287.402 mm. Basic minor diameter: 285.67 mm. Basic major diameter: 290 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290 | Not specified |
| Pitch | 287.402 | 287.638 |
| Minor | 285.67 | 286.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290.06 | Not specified |
| Pitch | 287.462 | 287.762 |
| Minor | 285.73 | 286.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290 | Not specified |
| Pitch | 287.402 | 287.702 |
| Minor | 285.67 | 286.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290.06 | Not specified |
| Pitch | 287.462 | 287.837 |
| Minor | 285.73 | 286.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290 | Not specified |
| Pitch | 287.402 | 287.777 |
| Minor | 285.67 | 286.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290.06 | Not specified |
| Pitch | 287.462 | 287.937 |
| Minor | 285.73 | 286.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290 | Not specified |
| Pitch | 287.402 | 287.877 |
| Minor | 285.67 | 286.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290.06 | Not specified |
| Pitch | 287.462 | 288.062 |
| Minor | 285.73 | 286.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 290 | Not specified |
| Pitch | 287.402 | 288.002 |
| Minor | 285.67 | 286.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 289.465 | 289.94 |
| Pitch | 287.062 | 287.342 |
| Root d3 | 284.598 | 285.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 289.465 | 289.94 |
| Pitch | 287.162 | 287.342 |
| Root d3 | 284.698 | 285.033 |
Cutting tap preparation
Pre-drill recommendation: 286 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 288.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.