M27 × 3 Metric Thread Dimensions
Nominal diameter 27 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 25.051 mm. Basic minor diameter: 23.752 mm. Basic major diameter: 27 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27 | Not specified |
| Pitch | 25.051 | 25.221 |
| Minor | 23.752 | 24.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27.048 | Not specified |
| Pitch | 25.099 | 25.311 |
| Minor | 23.8 | 24.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27 | Not specified |
| Pitch | 25.051 | 25.263 |
| Minor | 23.752 | 24.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27.048 | Not specified |
| Pitch | 25.099 | 25.364 |
| Minor | 23.8 | 24.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27 | Not specified |
| Pitch | 25.051 | 25.316 |
| Minor | 23.752 | 24.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27.048 | Not specified |
| Pitch | 25.099 | 25.434 |
| Minor | 23.8 | 24.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27 | Not specified |
| Pitch | 25.051 | 25.386 |
| Minor | 23.752 | 24.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27.048 | Not specified |
| Pitch | 25.099 | 25.524 |
| Minor | 23.8 | 24.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27 | Not specified |
| Pitch | 25.051 | 25.476 |
| Minor | 23.752 | 24.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 26.577 | 26.952 |
| Pitch | 24.803 | 25.003 |
| Root d3 | 22.955 | 23.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 26.577 | 26.952 |
| Pitch | 24.878 | 25.003 |
| Root d3 | 23.03 | 23.271 |
Cutting tap preparation
Pre-drill recommendation: 24 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 25.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.