M27 × 0.75 Metric Thread Dimensions
Nominal diameter 27 mm; pitch 0.75 mm.
Basic geometry
Basic pitch diameter: 26.513 mm. Basic minor diameter: 26.188 mm. Basic major diameter: 27 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27 | Not specified |
| Pitch | 26.513 | 26.608 |
| Minor | 26.188 | 26.306 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27.022 | Not specified |
| Pitch | 26.535 | 26.653 |
| Minor | 26.21 | 26.36 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27 | Not specified |
| Pitch | 26.513 | 26.631 |
| Minor | 26.188 | 26.338 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27.022 | Not specified |
| Pitch | 26.535 | 26.685 |
| Minor | 26.21 | 26.4 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27 | Not specified |
| Pitch | 26.513 | 26.663 |
| Minor | 26.188 | 26.378 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 26.838 | 26.978 |
| Pitch | 26.379 | 26.491 |
| Root d3 | 25.917 | 26.058 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 26.838 | 26.978 |
| Pitch | 26.42 | 26.491 |
| Root d3 | 25.958 | 26.058 |
Cutting tap preparation
Pre-drill recommendation: 26.25 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 26.65 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.