M27 × 2 Metric Thread Dimensions
Nominal diameter 27 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 25.701 mm. Basic minor diameter: 24.835 mm. Basic major diameter: 27 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27 | Not specified |
| Pitch | 25.701 | 25.841 |
| Minor | 24.835 | 25.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27.038 | Not specified |
| Pitch | 25.739 | 25.919 |
| Minor | 24.873 | 25.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27 | Not specified |
| Pitch | 25.701 | 25.881 |
| Minor | 24.835 | 25.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27.038 | Not specified |
| Pitch | 25.739 | 25.963 |
| Minor | 24.873 | 25.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27 | Not specified |
| Pitch | 25.701 | 25.925 |
| Minor | 24.835 | 25.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27.038 | Not specified |
| Pitch | 25.739 | 26.019 |
| Minor | 24.873 | 25.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27 | Not specified |
| Pitch | 25.701 | 25.981 |
| Minor | 24.835 | 25.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27.038 | Not specified |
| Pitch | 25.739 | 26.094 |
| Minor | 24.873 | 25.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27 | Not specified |
| Pitch | 25.701 | 26.056 |
| Minor | 24.835 | 25.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 26.682 | 26.962 |
| Pitch | 25.493 | 25.663 |
| Root d3 | 24.261 | 24.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 26.682 | 26.962 |
| Pitch | 25.557 | 25.663 |
| Root d3 | 24.325 | 24.508 |
Cutting tap preparation
Pre-drill recommendation: 25 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 26.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.