M270 × 6 Metric Thread Dimensions
Nominal diameter 270 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 266.103 mm. Basic minor diameter: 263.505 mm. Basic major diameter: 270 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270 | Not specified |
| Pitch | 266.103 | 266.368 |
| Minor | 263.505 | 264.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270.08 | Not specified |
| Pitch | 266.183 | 266.518 |
| Minor | 263.585 | 264.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270 | Not specified |
| Pitch | 266.103 | 266.438 |
| Minor | 263.505 | 264.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270.08 | Not specified |
| Pitch | 266.183 | 266.608 |
| Minor | 263.585 | 264.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270 | Not specified |
| Pitch | 266.103 | 266.528 |
| Minor | 263.505 | 264.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270.08 | Not specified |
| Pitch | 266.183 | 266.713 |
| Minor | 263.585 | 264.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270 | Not specified |
| Pitch | 266.103 | 266.633 |
| Minor | 263.505 | 264.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270.08 | Not specified |
| Pitch | 266.183 | 266.853 |
| Minor | 263.585 | 264.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270 | Not specified |
| Pitch | 266.103 | 266.773 |
| Minor | 263.505 | 264.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 269.32 | 269.92 |
| Pitch | 265.708 | 266.023 |
| Root d3 | 262.012 | 262.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 269.32 | 269.92 |
| Pitch | 265.823 | 266.023 |
| Root d3 | 262.127 | 262.559 |
Cutting tap preparation
Pre-drill recommendation: 264 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 267.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.