M270 × 4 Metric Thread Dimensions
Nominal diameter 270 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 267.402 mm. Basic minor diameter: 265.67 mm. Basic major diameter: 270 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270 | Not specified |
| Pitch | 267.402 | 267.638 |
| Minor | 265.67 | 266.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270.06 | Not specified |
| Pitch | 267.462 | 267.762 |
| Minor | 265.73 | 266.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270 | Not specified |
| Pitch | 267.402 | 267.702 |
| Minor | 265.67 | 266.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270.06 | Not specified |
| Pitch | 267.462 | 267.837 |
| Minor | 265.73 | 266.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270 | Not specified |
| Pitch | 267.402 | 267.777 |
| Minor | 265.67 | 266.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270.06 | Not specified |
| Pitch | 267.462 | 267.937 |
| Minor | 265.73 | 266.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270 | Not specified |
| Pitch | 267.402 | 267.877 |
| Minor | 265.67 | 266.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270.06 | Not specified |
| Pitch | 267.462 | 268.062 |
| Minor | 265.73 | 266.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270 | Not specified |
| Pitch | 267.402 | 268.002 |
| Minor | 265.67 | 266.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 269.465 | 269.94 |
| Pitch | 267.062 | 267.342 |
| Root d3 | 264.598 | 265.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 269.465 | 269.94 |
| Pitch | 267.162 | 267.342 |
| Root d3 | 264.698 | 265.033 |
Cutting tap preparation
Pre-drill recommendation: 266 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 268.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.