M270 × 3 Metric Thread Dimensions
Nominal diameter 270 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 268.051 mm. Basic minor diameter: 266.752 mm. Basic major diameter: 270 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270 | Not specified |
| Pitch | 268.051 | 268.263 |
| Minor | 266.752 | 267.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270.048 | Not specified |
| Pitch | 268.099 | 268.364 |
| Minor | 266.8 | 267.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270 | Not specified |
| Pitch | 268.051 | 268.316 |
| Minor | 266.752 | 267.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270.048 | Not specified |
| Pitch | 268.099 | 268.434 |
| Minor | 266.8 | 267.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270 | Not specified |
| Pitch | 268.051 | 268.386 |
| Minor | 266.752 | 267.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270.048 | Not specified |
| Pitch | 268.099 | 268.524 |
| Minor | 266.8 | 267.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270 | Not specified |
| Pitch | 268.051 | 268.476 |
| Minor | 266.752 | 267.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270.048 | Not specified |
| Pitch | 268.099 | 268.629 |
| Minor | 266.8 | 267.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 270 | Not specified |
| Pitch | 268.051 | 268.581 |
| Minor | 266.752 | 267.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 269.577 | 269.952 |
| Pitch | 267.753 | 268.003 |
| Root d3 | 265.905 | 266.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 269.577 | 269.952 |
| Pitch | 267.843 | 268.003 |
| Root d3 | 265.995 | 266.271 |
Cutting tap preparation
Pre-drill recommendation: 267 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 268.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.