M265 × 6 Metric Thread Dimensions
Nominal diameter 265 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 261.103 mm. Basic minor diameter: 258.505 mm. Basic major diameter: 265 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265 | Not specified |
| Pitch | 261.103 | 261.368 |
| Minor | 258.505 | 259.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265.08 | Not specified |
| Pitch | 261.183 | 261.518 |
| Minor | 258.585 | 259.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265 | Not specified |
| Pitch | 261.103 | 261.438 |
| Minor | 258.505 | 259.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265.08 | Not specified |
| Pitch | 261.183 | 261.608 |
| Minor | 258.585 | 259.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265 | Not specified |
| Pitch | 261.103 | 261.528 |
| Minor | 258.505 | 259.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265.08 | Not specified |
| Pitch | 261.183 | 261.713 |
| Minor | 258.585 | 259.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265 | Not specified |
| Pitch | 261.103 | 261.633 |
| Minor | 258.505 | 259.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265.08 | Not specified |
| Pitch | 261.183 | 261.853 |
| Minor | 258.585 | 259.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265 | Not specified |
| Pitch | 261.103 | 261.773 |
| Minor | 258.505 | 259.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 264.32 | 264.92 |
| Pitch | 260.708 | 261.023 |
| Root d3 | 257.012 | 257.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 264.32 | 264.92 |
| Pitch | 260.823 | 261.023 |
| Root d3 | 257.127 | 257.559 |
Cutting tap preparation
Pre-drill recommendation: 259 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 262.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.