M265 × 4 Metric Thread Dimensions
Nominal diameter 265 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 262.402 mm. Basic minor diameter: 260.67 mm. Basic major diameter: 265 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265 | Not specified |
| Pitch | 262.402 | 262.638 |
| Minor | 260.67 | 261.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265.06 | Not specified |
| Pitch | 262.462 | 262.762 |
| Minor | 260.73 | 261.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265 | Not specified |
| Pitch | 262.402 | 262.702 |
| Minor | 260.67 | 261.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265.06 | Not specified |
| Pitch | 262.462 | 262.837 |
| Minor | 260.73 | 261.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265 | Not specified |
| Pitch | 262.402 | 262.777 |
| Minor | 260.67 | 261.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265.06 | Not specified |
| Pitch | 262.462 | 262.937 |
| Minor | 260.73 | 261.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265 | Not specified |
| Pitch | 262.402 | 262.877 |
| Minor | 260.67 | 261.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265.06 | Not specified |
| Pitch | 262.462 | 263.062 |
| Minor | 260.73 | 261.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265 | Not specified |
| Pitch | 262.402 | 263.002 |
| Minor | 260.67 | 261.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 264.465 | 264.94 |
| Pitch | 262.062 | 262.342 |
| Root d3 | 259.598 | 260.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 264.465 | 264.94 |
| Pitch | 262.162 | 262.342 |
| Root d3 | 259.698 | 260.033 |
Cutting tap preparation
Pre-drill recommendation: 261 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 263.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.