M265 × 3 Metric Thread Dimensions
Nominal diameter 265 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 263.051 mm. Basic minor diameter: 261.752 mm. Basic major diameter: 265 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265 | Not specified |
| Pitch | 263.051 | 263.263 |
| Minor | 261.752 | 262.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265.048 | Not specified |
| Pitch | 263.099 | 263.364 |
| Minor | 261.8 | 262.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265 | Not specified |
| Pitch | 263.051 | 263.316 |
| Minor | 261.752 | 262.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265.048 | Not specified |
| Pitch | 263.099 | 263.434 |
| Minor | 261.8 | 262.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265 | Not specified |
| Pitch | 263.051 | 263.386 |
| Minor | 261.752 | 262.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265.048 | Not specified |
| Pitch | 263.099 | 263.524 |
| Minor | 261.8 | 262.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265 | Not specified |
| Pitch | 263.051 | 263.476 |
| Minor | 261.752 | 262.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265.048 | Not specified |
| Pitch | 263.099 | 263.629 |
| Minor | 261.8 | 262.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 265 | Not specified |
| Pitch | 263.051 | 263.581 |
| Minor | 261.752 | 262.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 264.577 | 264.952 |
| Pitch | 262.753 | 263.003 |
| Root d3 | 260.905 | 261.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 264.577 | 264.952 |
| Pitch | 262.843 | 263.003 |
| Root d3 | 260.995 | 261.271 |
Cutting tap preparation
Pre-drill recommendation: 262 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 263.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.