M25 × 2 Metric Thread Dimensions
Nominal diameter 25 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 23.701 mm. Basic minor diameter: 22.835 mm. Basic major diameter: 25 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25 | Not specified |
| Pitch | 23.701 | 23.841 |
| Minor | 22.835 | 23.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25.038 | Not specified |
| Pitch | 23.739 | 23.919 |
| Minor | 22.873 | 23.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25 | Not specified |
| Pitch | 23.701 | 23.881 |
| Minor | 22.835 | 23.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25.038 | Not specified |
| Pitch | 23.739 | 23.963 |
| Minor | 22.873 | 23.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25 | Not specified |
| Pitch | 23.701 | 23.925 |
| Minor | 22.835 | 23.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25.038 | Not specified |
| Pitch | 23.739 | 24.019 |
| Minor | 22.873 | 23.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25 | Not specified |
| Pitch | 23.701 | 23.981 |
| Minor | 22.835 | 23.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25.038 | Not specified |
| Pitch | 23.739 | 24.094 |
| Minor | 22.873 | 23.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25 | Not specified |
| Pitch | 23.701 | 24.056 |
| Minor | 22.835 | 23.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.682 | 24.962 |
| Pitch | 23.493 | 23.663 |
| Root d3 | 22.261 | 22.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.682 | 24.962 |
| Pitch | 23.557 | 23.663 |
| Root d3 | 22.325 | 22.508 |
Cutting tap preparation
Pre-drill recommendation: 23 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 24.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.