M25 × 1.5 Metric Thread Dimensions
Nominal diameter 25 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 24.026 mm. Basic minor diameter: 23.376 mm. Basic major diameter: 25 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25 | Not specified |
| Pitch | 24.026 | 24.151 |
| Minor | 23.376 | 23.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25.032 | Not specified |
| Pitch | 24.058 | 24.218 |
| Minor | 23.408 | 23.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25 | Not specified |
| Pitch | 24.026 | 24.186 |
| Minor | 23.376 | 23.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25.032 | Not specified |
| Pitch | 24.058 | 24.258 |
| Minor | 23.408 | 23.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25 | Not specified |
| Pitch | 24.026 | 24.226 |
| Minor | 23.376 | 23.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25.032 | Not specified |
| Pitch | 24.058 | 24.308 |
| Minor | 23.408 | 23.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25 | Not specified |
| Pitch | 24.026 | 24.276 |
| Minor | 23.376 | 23.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25.032 | Not specified |
| Pitch | 24.058 | 24.373 |
| Minor | 23.408 | 23.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25 | Not specified |
| Pitch | 24.026 | 24.341 |
| Minor | 23.376 | 23.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.732 | 24.968 |
| Pitch | 23.844 | 23.994 |
| Root d3 | 22.92 | 23.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.732 | 24.968 |
| Pitch | 23.899 | 23.994 |
| Root d3 | 22.975 | 23.128 |
Cutting tap preparation
Pre-drill recommendation: 23.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 24.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.