M25 × 1 Metric Thread Dimensions
Nominal diameter 25 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 24.35 mm. Basic minor diameter: 23.917 mm. Basic major diameter: 25 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25 | Not specified |
| Pitch | 24.35 | 24.456 |
| Minor | 23.917 | 24.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25.026 | Not specified |
| Pitch | 24.376 | 24.508 |
| Minor | 23.943 | 24.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25 | Not specified |
| Pitch | 24.35 | 24.482 |
| Minor | 23.917 | 24.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25.026 | Not specified |
| Pitch | 24.376 | 24.546 |
| Minor | 23.943 | 24.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25 | Not specified |
| Pitch | 24.35 | 24.52 |
| Minor | 23.917 | 24.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25.026 | Not specified |
| Pitch | 24.376 | 24.588 |
| Minor | 23.943 | 24.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 25 | Not specified |
| Pitch | 24.35 | 24.562 |
| Minor | 23.917 | 24.217 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.794 | 24.974 |
| Pitch | 24.199 | 24.324 |
| Root d3 | 23.583 | 23.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.794 | 24.974 |
| Pitch | 24.244 | 24.324 |
| Root d3 | 23.628 | 23.747 |
Cutting tap preparation
Pre-drill recommendation: 24 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 24.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.