M245 × 4 Metric Thread Dimensions
Nominal diameter 245 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 242.402 mm. Basic minor diameter: 240.67 mm. Basic major diameter: 245 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245 | Not specified |
| Pitch | 242.402 | 242.638 |
| Minor | 240.67 | 241.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245.06 | Not specified |
| Pitch | 242.462 | 242.762 |
| Minor | 240.73 | 241.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245 | Not specified |
| Pitch | 242.402 | 242.702 |
| Minor | 240.67 | 241.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245.06 | Not specified |
| Pitch | 242.462 | 242.837 |
| Minor | 240.73 | 241.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245 | Not specified |
| Pitch | 242.402 | 242.777 |
| Minor | 240.67 | 241.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245.06 | Not specified |
| Pitch | 242.462 | 242.937 |
| Minor | 240.73 | 241.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245 | Not specified |
| Pitch | 242.402 | 242.877 |
| Minor | 240.67 | 241.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245.06 | Not specified |
| Pitch | 242.462 | 243.062 |
| Minor | 240.73 | 241.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245 | Not specified |
| Pitch | 242.402 | 243.002 |
| Minor | 240.67 | 241.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 244.465 | 244.94 |
| Pitch | 242.062 | 242.342 |
| Root d3 | 239.598 | 240.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 244.465 | 244.94 |
| Pitch | 242.162 | 242.342 |
| Root d3 | 239.698 | 240.033 |
Cutting tap preparation
Pre-drill recommendation: 241 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 243.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.