M245 × 2 Metric Thread Dimensions
Nominal diameter 245 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 243.701 mm. Basic minor diameter: 242.835 mm. Basic major diameter: 245 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245 | Not specified |
| Pitch | 243.701 | 243.881 |
| Minor | 242.835 | 243.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245.038 | Not specified |
| Pitch | 243.739 | 243.963 |
| Minor | 242.873 | 243.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245 | Not specified |
| Pitch | 243.701 | 243.925 |
| Minor | 242.835 | 243.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245.038 | Not specified |
| Pitch | 243.739 | 244.019 |
| Minor | 242.873 | 243.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245 | Not specified |
| Pitch | 243.701 | 243.981 |
| Minor | 242.835 | 243.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245.038 | Not specified |
| Pitch | 243.739 | 244.094 |
| Minor | 242.873 | 243.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245 | Not specified |
| Pitch | 243.701 | 244.056 |
| Minor | 242.835 | 243.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245.038 | Not specified |
| Pitch | 243.739 | 244.189 |
| Minor | 242.873 | 243.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245 | Not specified |
| Pitch | 243.701 | 244.151 |
| Minor | 242.835 | 243.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 244.682 | 244.962 |
| Pitch | 243.451 | 243.663 |
| Root d3 | 242.219 | 242.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 244.682 | 244.962 |
| Pitch | 243.531 | 243.663 |
| Root d3 | 242.299 | 242.508 |
Cutting tap preparation
Pre-drill recommendation: 243 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 244.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.