M245 × 3 Metric Thread Dimensions
Nominal diameter 245 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 243.051 mm. Basic minor diameter: 241.752 mm. Basic major diameter: 245 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245 | Not specified |
| Pitch | 243.051 | 243.263 |
| Minor | 241.752 | 242.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245.048 | Not specified |
| Pitch | 243.099 | 243.364 |
| Minor | 241.8 | 242.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245 | Not specified |
| Pitch | 243.051 | 243.316 |
| Minor | 241.752 | 242.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245.048 | Not specified |
| Pitch | 243.099 | 243.434 |
| Minor | 241.8 | 242.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245 | Not specified |
| Pitch | 243.051 | 243.386 |
| Minor | 241.752 | 242.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245.048 | Not specified |
| Pitch | 243.099 | 243.524 |
| Minor | 241.8 | 242.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245 | Not specified |
| Pitch | 243.051 | 243.476 |
| Minor | 241.752 | 242.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245.048 | Not specified |
| Pitch | 243.099 | 243.629 |
| Minor | 241.8 | 242.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 245 | Not specified |
| Pitch | 243.051 | 243.581 |
| Minor | 241.752 | 242.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 244.577 | 244.952 |
| Pitch | 242.753 | 243.003 |
| Root d3 | 240.905 | 241.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 244.577 | 244.952 |
| Pitch | 242.843 | 243.003 |
| Root d3 | 240.995 | 241.271 |
Cutting tap preparation
Pre-drill recommendation: 242 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 243.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.