M235 × 6 Metric Thread Dimensions
Nominal diameter 235 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 231.103 mm. Basic minor diameter: 228.505 mm. Basic major diameter: 235 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235 | Not specified |
| Pitch | 231.103 | 231.368 |
| Minor | 228.505 | 229.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235.08 | Not specified |
| Pitch | 231.183 | 231.518 |
| Minor | 228.585 | 229.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235 | Not specified |
| Pitch | 231.103 | 231.438 |
| Minor | 228.505 | 229.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235.08 | Not specified |
| Pitch | 231.183 | 231.608 |
| Minor | 228.585 | 229.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235 | Not specified |
| Pitch | 231.103 | 231.528 |
| Minor | 228.505 | 229.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235.08 | Not specified |
| Pitch | 231.183 | 231.713 |
| Minor | 228.585 | 229.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235 | Not specified |
| Pitch | 231.103 | 231.633 |
| Minor | 228.505 | 229.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235.08 | Not specified |
| Pitch | 231.183 | 231.853 |
| Minor | 228.585 | 229.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235 | Not specified |
| Pitch | 231.103 | 231.773 |
| Minor | 228.505 | 229.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 234.32 | 234.92 |
| Pitch | 230.708 | 231.023 |
| Root d3 | 227.012 | 227.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 234.32 | 234.92 |
| Pitch | 230.823 | 231.023 |
| Root d3 | 227.127 | 227.559 |
Cutting tap preparation
Pre-drill recommendation: 229 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 232.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.