M235 × 4 Metric Thread Dimensions
Nominal diameter 235 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 232.402 mm. Basic minor diameter: 230.67 mm. Basic major diameter: 235 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235 | Not specified |
| Pitch | 232.402 | 232.638 |
| Minor | 230.67 | 231.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235.06 | Not specified |
| Pitch | 232.462 | 232.762 |
| Minor | 230.73 | 231.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235 | Not specified |
| Pitch | 232.402 | 232.702 |
| Minor | 230.67 | 231.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235.06 | Not specified |
| Pitch | 232.462 | 232.837 |
| Minor | 230.73 | 231.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235 | Not specified |
| Pitch | 232.402 | 232.777 |
| Minor | 230.67 | 231.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235.06 | Not specified |
| Pitch | 232.462 | 232.937 |
| Minor | 230.73 | 231.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235 | Not specified |
| Pitch | 232.402 | 232.877 |
| Minor | 230.67 | 231.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235.06 | Not specified |
| Pitch | 232.462 | 233.062 |
| Minor | 230.73 | 231.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235 | Not specified |
| Pitch | 232.402 | 233.002 |
| Minor | 230.67 | 231.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 234.465 | 234.94 |
| Pitch | 232.062 | 232.342 |
| Root d3 | 229.598 | 230.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 234.465 | 234.94 |
| Pitch | 232.162 | 232.342 |
| Root d3 | 229.698 | 230.033 |
Cutting tap preparation
Pre-drill recommendation: 231 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 233.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.