M235 × 3 Metric Thread Dimensions
Nominal diameter 235 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 233.051 mm. Basic minor diameter: 231.752 mm. Basic major diameter: 235 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235 | Not specified |
| Pitch | 233.051 | 233.263 |
| Minor | 231.752 | 232.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235.048 | Not specified |
| Pitch | 233.099 | 233.364 |
| Minor | 231.8 | 232.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235 | Not specified |
| Pitch | 233.051 | 233.316 |
| Minor | 231.752 | 232.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235.048 | Not specified |
| Pitch | 233.099 | 233.434 |
| Minor | 231.8 | 232.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235 | Not specified |
| Pitch | 233.051 | 233.386 |
| Minor | 231.752 | 232.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235.048 | Not specified |
| Pitch | 233.099 | 233.524 |
| Minor | 231.8 | 232.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235 | Not specified |
| Pitch | 233.051 | 233.476 |
| Minor | 231.752 | 232.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235.048 | Not specified |
| Pitch | 233.099 | 233.629 |
| Minor | 231.8 | 232.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 235 | Not specified |
| Pitch | 233.051 | 233.581 |
| Minor | 231.752 | 232.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 234.577 | 234.952 |
| Pitch | 232.753 | 233.003 |
| Root d3 | 230.905 | 231.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 234.577 | 234.952 |
| Pitch | 232.843 | 233.003 |
| Root d3 | 230.995 | 231.271 |
Cutting tap preparation
Pre-drill recommendation: 232 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 233.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.