M215 × 6 Metric Thread Dimensions
Nominal diameter 215 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 211.103 mm. Basic minor diameter: 208.505 mm. Basic major diameter: 215 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215 | Not specified |
| Pitch | 211.103 | 211.368 |
| Minor | 208.505 | 209.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215.08 | Not specified |
| Pitch | 211.183 | 211.518 |
| Minor | 208.585 | 209.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215 | Not specified |
| Pitch | 211.103 | 211.438 |
| Minor | 208.505 | 209.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215.08 | Not specified |
| Pitch | 211.183 | 211.608 |
| Minor | 208.585 | 209.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215 | Not specified |
| Pitch | 211.103 | 211.528 |
| Minor | 208.505 | 209.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215.08 | Not specified |
| Pitch | 211.183 | 211.713 |
| Minor | 208.585 | 209.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215 | Not specified |
| Pitch | 211.103 | 211.633 |
| Minor | 208.505 | 209.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215.08 | Not specified |
| Pitch | 211.183 | 211.853 |
| Minor | 208.585 | 209.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215 | Not specified |
| Pitch | 211.103 | 211.773 |
| Minor | 208.505 | 209.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 214.32 | 214.92 |
| Pitch | 210.708 | 211.023 |
| Root d3 | 207.012 | 207.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 214.32 | 214.92 |
| Pitch | 210.823 | 211.023 |
| Root d3 | 207.127 | 207.559 |
Cutting tap preparation
Pre-drill recommendation: 209 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 212.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.