M215 × 4 Metric Thread Dimensions
Nominal diameter 215 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 212.402 mm. Basic minor diameter: 210.67 mm. Basic major diameter: 215 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215 | Not specified |
| Pitch | 212.402 | 212.638 |
| Minor | 210.67 | 211.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215.06 | Not specified |
| Pitch | 212.462 | 212.762 |
| Minor | 210.73 | 211.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215 | Not specified |
| Pitch | 212.402 | 212.702 |
| Minor | 210.67 | 211.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215.06 | Not specified |
| Pitch | 212.462 | 212.837 |
| Minor | 210.73 | 211.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215 | Not specified |
| Pitch | 212.402 | 212.777 |
| Minor | 210.67 | 211.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215.06 | Not specified |
| Pitch | 212.462 | 212.937 |
| Minor | 210.73 | 211.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215 | Not specified |
| Pitch | 212.402 | 212.877 |
| Minor | 210.67 | 211.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215.06 | Not specified |
| Pitch | 212.462 | 213.062 |
| Minor | 210.73 | 211.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215 | Not specified |
| Pitch | 212.402 | 213.002 |
| Minor | 210.67 | 211.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 214.465 | 214.94 |
| Pitch | 212.062 | 212.342 |
| Root d3 | 209.598 | 210.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 214.465 | 214.94 |
| Pitch | 212.162 | 212.342 |
| Root d3 | 209.698 | 210.033 |
Cutting tap preparation
Pre-drill recommendation: 211 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 213.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.