M215 × 3 Metric Thread Dimensions
Nominal diameter 215 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 213.051 mm. Basic minor diameter: 211.752 mm. Basic major diameter: 215 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215 | Not specified |
| Pitch | 213.051 | 213.263 |
| Minor | 211.752 | 212.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215.048 | Not specified |
| Pitch | 213.099 | 213.364 |
| Minor | 211.8 | 212.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215 | Not specified |
| Pitch | 213.051 | 213.316 |
| Minor | 211.752 | 212.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215.048 | Not specified |
| Pitch | 213.099 | 213.434 |
| Minor | 211.8 | 212.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215 | Not specified |
| Pitch | 213.051 | 213.386 |
| Minor | 211.752 | 212.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215.048 | Not specified |
| Pitch | 213.099 | 213.524 |
| Minor | 211.8 | 212.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215 | Not specified |
| Pitch | 213.051 | 213.476 |
| Minor | 211.752 | 212.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215.048 | Not specified |
| Pitch | 213.099 | 213.629 |
| Minor | 211.8 | 212.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 215 | Not specified |
| Pitch | 213.051 | 213.581 |
| Minor | 211.752 | 212.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 214.577 | 214.952 |
| Pitch | 212.753 | 213.003 |
| Root d3 | 210.905 | 211.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 214.577 | 214.952 |
| Pitch | 212.843 | 213.003 |
| Root d3 | 210.995 | 211.271 |
Cutting tap preparation
Pre-drill recommendation: 212 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 213.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.