M20 × 2 Metric Thread Dimensions
Nominal diameter 20 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 18.701 mm. Basic minor diameter: 17.835 mm. Basic major diameter: 20 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20 | Not specified |
| Pitch | 18.701 | 18.833 |
| Minor | 17.835 | 18.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20.038 | Not specified |
| Pitch | 18.739 | 18.909 |
| Minor | 17.873 | 18.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20 | Not specified |
| Pitch | 18.701 | 18.871 |
| Minor | 17.835 | 18.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20.038 | Not specified |
| Pitch | 18.739 | 18.951 |
| Minor | 17.873 | 18.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20 | Not specified |
| Pitch | 18.701 | 18.913 |
| Minor | 17.835 | 18.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20.038 | Not specified |
| Pitch | 18.739 | 19.004 |
| Minor | 17.873 | 18.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20 | Not specified |
| Pitch | 18.701 | 18.966 |
| Minor | 17.835 | 18.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20.038 | Not specified |
| Pitch | 18.739 | 19.074 |
| Minor | 17.873 | 18.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20 | Not specified |
| Pitch | 18.701 | 19.036 |
| Minor | 17.835 | 18.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 19.682 | 19.962 |
| Pitch | 18.503 | 18.663 |
| Root d3 | 17.271 | 17.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 19.682 | 19.962 |
| Pitch | 18.563 | 18.663 |
| Root d3 | 17.331 | 17.508 |
Cutting tap preparation
Pre-drill recommendation: 18 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 19.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.