M20 × 1 Metric Thread Dimensions
Nominal diameter 20 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 19.35 mm. Basic minor diameter: 18.917 mm. Basic major diameter: 20 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20 | Not specified |
| Pitch | 19.35 | 19.45 |
| Minor | 18.917 | 19.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20.026 | Not specified |
| Pitch | 19.376 | 19.501 |
| Minor | 18.943 | 19.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20 | Not specified |
| Pitch | 19.35 | 19.475 |
| Minor | 18.917 | 19.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20.026 | Not specified |
| Pitch | 19.376 | 19.536 |
| Minor | 18.943 | 19.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20 | Not specified |
| Pitch | 19.35 | 19.51 |
| Minor | 18.917 | 19.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20.026 | Not specified |
| Pitch | 19.376 | 19.576 |
| Minor | 18.943 | 19.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20 | Not specified |
| Pitch | 19.35 | 19.55 |
| Minor | 18.917 | 19.217 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20.026 | Not specified |
| Pitch | 19.376 | 19.626 |
| Minor | 18.943 | 19.318 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20 | Not specified |
| Pitch | 19.35 | 19.6 |
| Minor | 18.917 | 19.292 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 19.794 | 19.974 |
| Pitch | 19.206 | 19.324 |
| Root d3 | 18.59 | 18.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 19.794 | 19.974 |
| Pitch | 19.249 | 19.324 |
| Root d3 | 18.633 | 18.747 |
Cutting tap preparation
Pre-drill recommendation: 19 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 19.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.