M20 × 0.5 Metric Thread Dimensions
Nominal diameter 20 mm; pitch 0.5 mm.
Basic geometry
Basic pitch diameter: 19.675 mm. Basic minor diameter: 19.459 mm. Basic major diameter: 20 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20 | Not specified |
| Pitch | 19.675 | 19.75 |
| Minor | 19.459 | 19.549 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20.02 | Not specified |
| Pitch | 19.695 | 19.79 |
| Minor | 19.479 | 19.591 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20 | Not specified |
| Pitch | 19.675 | 19.77 |
| Minor | 19.459 | 19.571 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20.02 | Not specified |
| Pitch | 19.695 | 19.813 |
| Minor | 19.479 | 19.619 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 20 | Not specified |
| Pitch | 19.675 | 19.793 |
| Minor | 19.459 | 19.599 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 19.874 | 19.98 |
| Pitch | 19.565 | 19.655 |
| Root d3 | 19.257 | 19.367 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 19.874 | 19.98 |
| Pitch | 19.599 | 19.655 |
| Root d3 | 19.291 | 19.367 |
Cutting tap preparation
Pre-drill recommendation: 19.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 19.78 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.