M205 × 6 Metric Thread Dimensions
Nominal diameter 205 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 201.103 mm. Basic minor diameter: 198.505 mm. Basic major diameter: 205 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205 | Not specified |
| Pitch | 201.103 | 201.368 |
| Minor | 198.505 | 199.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205.08 | Not specified |
| Pitch | 201.183 | 201.518 |
| Minor | 198.585 | 199.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205 | Not specified |
| Pitch | 201.103 | 201.438 |
| Minor | 198.505 | 199.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205.08 | Not specified |
| Pitch | 201.183 | 201.608 |
| Minor | 198.585 | 199.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205 | Not specified |
| Pitch | 201.103 | 201.528 |
| Minor | 198.505 | 199.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205.08 | Not specified |
| Pitch | 201.183 | 201.713 |
| Minor | 198.585 | 199.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205 | Not specified |
| Pitch | 201.103 | 201.633 |
| Minor | 198.505 | 199.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205.08 | Not specified |
| Pitch | 201.183 | 201.853 |
| Minor | 198.585 | 199.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205 | Not specified |
| Pitch | 201.103 | 201.773 |
| Minor | 198.505 | 199.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 204.32 | 204.92 |
| Pitch | 200.708 | 201.023 |
| Root d3 | 197.012 | 197.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 204.32 | 204.92 |
| Pitch | 200.823 | 201.023 |
| Root d3 | 197.127 | 197.559 |
Cutting tap preparation
Pre-drill recommendation: 199 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 202.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.