M205 × 2 Metric Thread Dimensions
Nominal diameter 205 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 203.701 mm. Basic minor diameter: 202.835 mm. Basic major diameter: 205 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205 | Not specified |
| Pitch | 203.701 | 203.881 |
| Minor | 202.835 | 203.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205.038 | Not specified |
| Pitch | 203.739 | 203.963 |
| Minor | 202.873 | 203.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205 | Not specified |
| Pitch | 203.701 | 203.925 |
| Minor | 202.835 | 203.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205.038 | Not specified |
| Pitch | 203.739 | 204.019 |
| Minor | 202.873 | 203.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205 | Not specified |
| Pitch | 203.701 | 203.981 |
| Minor | 202.835 | 203.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205.038 | Not specified |
| Pitch | 203.739 | 204.094 |
| Minor | 202.873 | 203.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205 | Not specified |
| Pitch | 203.701 | 204.056 |
| Minor | 202.835 | 203.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205.038 | Not specified |
| Pitch | 203.739 | 204.189 |
| Minor | 202.873 | 203.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205 | Not specified |
| Pitch | 203.701 | 204.151 |
| Minor | 202.835 | 203.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 204.682 | 204.962 |
| Pitch | 203.451 | 203.663 |
| Root d3 | 202.219 | 202.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 204.682 | 204.962 |
| Pitch | 203.531 | 203.663 |
| Root d3 | 202.299 | 202.508 |
Cutting tap preparation
Pre-drill recommendation: 203 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 204.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.