M205 × 3 Metric Thread Dimensions
Nominal diameter 205 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 203.051 mm. Basic minor diameter: 201.752 mm. Basic major diameter: 205 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205 | Not specified |
| Pitch | 203.051 | 203.263 |
| Minor | 201.752 | 202.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205.048 | Not specified |
| Pitch | 203.099 | 203.364 |
| Minor | 201.8 | 202.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205 | Not specified |
| Pitch | 203.051 | 203.316 |
| Minor | 201.752 | 202.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205.048 | Not specified |
| Pitch | 203.099 | 203.434 |
| Minor | 201.8 | 202.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205 | Not specified |
| Pitch | 203.051 | 203.386 |
| Minor | 201.752 | 202.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205.048 | Not specified |
| Pitch | 203.099 | 203.524 |
| Minor | 201.8 | 202.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205 | Not specified |
| Pitch | 203.051 | 203.476 |
| Minor | 201.752 | 202.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205.048 | Not specified |
| Pitch | 203.099 | 203.629 |
| Minor | 201.8 | 202.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 205 | Not specified |
| Pitch | 203.051 | 203.581 |
| Minor | 201.752 | 202.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 204.577 | 204.952 |
| Pitch | 202.753 | 203.003 |
| Root d3 | 200.905 | 201.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 204.577 | 204.952 |
| Pitch | 202.843 | 203.003 |
| Root d3 | 200.995 | 201.271 |
Cutting tap preparation
Pre-drill recommendation: 202 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 203.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.