M18 × 2.5 Metric Thread Dimensions
Nominal diameter 18 mm; pitch 2.5 mm.
Basic geometry
Basic pitch diameter: 16.376 mm. Basic minor diameter: 15.294 mm. Basic major diameter: 18 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18 | Not specified |
| Pitch | 16.376 | 16.516 |
| Minor | 15.294 | 15.574 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18.042 | Not specified |
| Pitch | 16.418 | 16.598 |
| Minor | 15.336 | 15.691 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18 | Not specified |
| Pitch | 16.376 | 16.556 |
| Minor | 15.294 | 15.649 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18.042 | Not specified |
| Pitch | 16.418 | 16.642 |
| Minor | 15.336 | 15.786 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18 | Not specified |
| Pitch | 16.376 | 16.6 |
| Minor | 15.294 | 15.744 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18.042 | Not specified |
| Pitch | 16.418 | 16.698 |
| Minor | 15.336 | 15.896 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18 | Not specified |
| Pitch | 16.376 | 16.656 |
| Minor | 15.294 | 15.854 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18.042 | Not specified |
| Pitch | 16.418 | 16.773 |
| Minor | 15.336 | 16.046 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18 | Not specified |
| Pitch | 16.376 | 16.731 |
| Minor | 15.294 | 16.004 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 17.623 | 17.958 |
| Pitch | 16.164 | 16.334 |
| Root d3 | 14.624 | 14.891 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 17.623 | 17.958 |
| Pitch | 16.228 | 16.334 |
| Root d3 | 14.688 | 14.891 |
Cutting tap preparation
Pre-drill recommendation: 15.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 16.9 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.