M18 × 0.75 Metric Thread Dimensions
Nominal diameter 18 mm; pitch 0.75 mm.
Basic geometry
Basic pitch diameter: 17.513 mm. Basic minor diameter: 17.188 mm. Basic major diameter: 18 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18 | Not specified |
| Pitch | 17.513 | 17.603 |
| Minor | 17.188 | 17.306 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18.022 | Not specified |
| Pitch | 17.535 | 17.647 |
| Minor | 17.21 | 17.36 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18 | Not specified |
| Pitch | 17.513 | 17.625 |
| Minor | 17.188 | 17.338 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18.022 | Not specified |
| Pitch | 17.535 | 17.675 |
| Minor | 17.21 | 17.4 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18 | Not specified |
| Pitch | 17.513 | 17.653 |
| Minor | 17.188 | 17.378 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18.022 | Not specified |
| Pitch | 17.535 | 17.715 |
| Minor | 17.21 | 17.446 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18 | Not specified |
| Pitch | 17.513 | 17.693 |
| Minor | 17.188 | 17.424 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 17.838 | 17.978 |
| Pitch | 17.385 | 17.491 |
| Root d3 | 16.923 | 17.058 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 17.838 | 17.978 |
| Pitch | 17.424 | 17.491 |
| Root d3 | 16.962 | 17.058 |
Cutting tap preparation
Pre-drill recommendation: 17.25 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 17.65 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.