M18 × 1.5 Metric Thread Dimensions
Nominal diameter 18 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 17.026 mm. Basic minor diameter: 16.376 mm. Basic major diameter: 18 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18 | Not specified |
| Pitch | 17.026 | 17.144 |
| Minor | 16.376 | 16.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18.032 | Not specified |
| Pitch | 17.058 | 17.208 |
| Minor | 16.408 | 16.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18 | Not specified |
| Pitch | 17.026 | 17.176 |
| Minor | 16.376 | 16.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18.032 | Not specified |
| Pitch | 17.058 | 17.248 |
| Minor | 16.408 | 16.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18 | Not specified |
| Pitch | 17.026 | 17.216 |
| Minor | 16.376 | 16.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18.032 | Not specified |
| Pitch | 17.058 | 17.294 |
| Minor | 16.408 | 16.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18 | Not specified |
| Pitch | 17.026 | 17.262 |
| Minor | 16.376 | 16.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18.032 | Not specified |
| Pitch | 17.058 | 17.358 |
| Minor | 16.408 | 16.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 18 | Not specified |
| Pitch | 17.026 | 17.326 |
| Minor | 16.376 | 16.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 17.732 | 17.968 |
| Pitch | 16.854 | 16.994 |
| Root d3 | 15.93 | 16.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 17.732 | 17.968 |
| Pitch | 16.904 | 16.994 |
| Root d3 | 15.98 | 16.128 |
Cutting tap preparation
Pre-drill recommendation: 16.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 17.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.