M17 × 1 Metric Thread Dimensions
Nominal diameter 17 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 16.35 mm. Basic minor diameter: 15.917 mm. Basic major diameter: 17 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 17 | Not specified |
| Pitch | 16.35 | 16.45 |
| Minor | 15.917 | 16.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 17.026 | Not specified |
| Pitch | 16.376 | 16.501 |
| Minor | 15.943 | 16.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 17 | Not specified |
| Pitch | 16.35 | 16.475 |
| Minor | 15.917 | 16.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 17.026 | Not specified |
| Pitch | 16.376 | 16.536 |
| Minor | 15.943 | 16.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 17 | Not specified |
| Pitch | 16.35 | 16.51 |
| Minor | 15.917 | 16.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 17.026 | Not specified |
| Pitch | 16.376 | 16.576 |
| Minor | 15.943 | 16.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 17 | Not specified |
| Pitch | 16.35 | 16.55 |
| Minor | 15.917 | 16.217 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 17.026 | Not specified |
| Pitch | 16.376 | 16.626 |
| Minor | 15.943 | 16.318 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 17 | Not specified |
| Pitch | 16.35 | 16.6 |
| Minor | 15.917 | 16.292 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.794 | 16.974 |
| Pitch | 16.206 | 16.324 |
| Root d3 | 15.59 | 15.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.794 | 16.974 |
| Pitch | 16.249 | 16.324 |
| Root d3 | 15.633 | 15.747 |
Cutting tap preparation
Pre-drill recommendation: 16 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 16.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.