M15 × 1 Metric Thread Dimensions
Nominal diameter 15 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 14.35 mm. Basic minor diameter: 13.917 mm. Basic major diameter: 15 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15 | Not specified |
| Pitch | 14.35 | 14.45 |
| Minor | 13.917 | 14.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.026 | Not specified |
| Pitch | 14.376 | 14.501 |
| Minor | 13.943 | 14.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15 | Not specified |
| Pitch | 14.35 | 14.475 |
| Minor | 13.917 | 14.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.026 | Not specified |
| Pitch | 14.376 | 14.536 |
| Minor | 13.943 | 14.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15 | Not specified |
| Pitch | 14.35 | 14.51 |
| Minor | 13.917 | 14.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.026 | Not specified |
| Pitch | 14.376 | 14.576 |
| Minor | 13.943 | 14.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15 | Not specified |
| Pitch | 14.35 | 14.55 |
| Minor | 13.917 | 14.217 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.026 | Not specified |
| Pitch | 14.376 | 14.626 |
| Minor | 13.943 | 14.318 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15 | Not specified |
| Pitch | 14.35 | 14.6 |
| Minor | 13.917 | 14.292 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.794 | 14.974 |
| Pitch | 14.206 | 14.324 |
| Root d3 | 13.59 | 13.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.794 | 14.974 |
| Pitch | 14.249 | 14.324 |
| Root d3 | 13.633 | 13.747 |
Cutting tap preparation
Pre-drill recommendation: 14 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 14.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.