M15 × 1.5 Metric Thread Dimensions
Nominal diameter 15 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 14.026 mm. Basic minor diameter: 13.376 mm. Basic major diameter: 15 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15 | Not specified |
| Pitch | 14.026 | 14.144 |
| Minor | 13.376 | 13.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.032 | Not specified |
| Pitch | 14.058 | 14.208 |
| Minor | 13.408 | 13.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15 | Not specified |
| Pitch | 14.026 | 14.176 |
| Minor | 13.376 | 13.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.032 | Not specified |
| Pitch | 14.058 | 14.248 |
| Minor | 13.408 | 13.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15 | Not specified |
| Pitch | 14.026 | 14.216 |
| Minor | 13.376 | 13.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.032 | Not specified |
| Pitch | 14.058 | 14.294 |
| Minor | 13.408 | 13.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15 | Not specified |
| Pitch | 14.026 | 14.262 |
| Minor | 13.376 | 13.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.032 | Not specified |
| Pitch | 14.058 | 14.358 |
| Minor | 13.408 | 13.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15 | Not specified |
| Pitch | 14.026 | 14.326 |
| Minor | 13.376 | 13.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.732 | 14.968 |
| Pitch | 13.854 | 13.994 |
| Root d3 | 12.93 | 13.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 14.732 | 14.968 |
| Pitch | 13.904 | 13.994 |
| Root d3 | 12.98 | 13.128 |
Cutting tap preparation
Pre-drill recommendation: 13.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 14.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.