M175 × 6 Metric Thread Dimensions
Nominal diameter 175 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 171.103 mm. Basic minor diameter: 168.505 mm. Basic major diameter: 175 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175 | Not specified |
| Pitch | 171.103 | 171.353 |
| Minor | 168.505 | 169.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175.08 | Not specified |
| Pitch | 171.183 | 171.498 |
| Minor | 168.585 | 169.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175 | Not specified |
| Pitch | 171.103 | 171.418 |
| Minor | 168.505 | 169.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175.08 | Not specified |
| Pitch | 171.183 | 171.583 |
| Minor | 168.585 | 169.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175 | Not specified |
| Pitch | 171.103 | 171.503 |
| Minor | 168.505 | 169.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175.08 | Not specified |
| Pitch | 171.183 | 171.683 |
| Minor | 168.585 | 169.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175 | Not specified |
| Pitch | 171.103 | 171.603 |
| Minor | 168.505 | 169.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175.08 | Not specified |
| Pitch | 171.183 | 171.813 |
| Minor | 168.585 | 169.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175 | Not specified |
| Pitch | 171.103 | 171.733 |
| Minor | 168.505 | 169.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 174.32 | 174.92 |
| Pitch | 170.723 | 171.023 |
| Root d3 | 167.027 | 167.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 174.32 | 174.92 |
| Pitch | 170.833 | 171.023 |
| Root d3 | 167.137 | 167.559 |
Cutting tap preparation
Pre-drill recommendation: 169 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 172.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.