M175 × 3 Metric Thread Dimensions
Nominal diameter 175 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 173.051 mm. Basic minor diameter: 171.752 mm. Basic major diameter: 175 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175 | Not specified |
| Pitch | 173.051 | 173.241 |
| Minor | 171.752 | 172.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175.048 | Not specified |
| Pitch | 173.099 | 173.335 |
| Minor | 171.8 | 172.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175 | Not specified |
| Pitch | 173.051 | 173.287 |
| Minor | 171.752 | 172.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175.048 | Not specified |
| Pitch | 173.099 | 173.399 |
| Minor | 171.8 | 172.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175 | Not specified |
| Pitch | 173.051 | 173.351 |
| Minor | 171.752 | 172.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175.048 | Not specified |
| Pitch | 173.099 | 173.474 |
| Minor | 171.8 | 172.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175 | Not specified |
| Pitch | 173.051 | 173.426 |
| Minor | 171.752 | 172.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175.048 | Not specified |
| Pitch | 173.099 | 173.574 |
| Minor | 171.8 | 172.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175 | Not specified |
| Pitch | 173.051 | 173.526 |
| Minor | 171.752 | 172.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 174.577 | 174.952 |
| Pitch | 172.779 | 173.003 |
| Root d3 | 170.931 | 171.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 174.577 | 174.952 |
| Pitch | 172.863 | 173.003 |
| Root d3 | 171.015 | 171.271 |
Cutting tap preparation
Pre-drill recommendation: 172 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 173.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.