M175 × 2 Metric Thread Dimensions
Nominal diameter 175 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 173.701 mm. Basic minor diameter: 172.835 mm. Basic major diameter: 175 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175 | Not specified |
| Pitch | 173.701 | 173.861 |
| Minor | 172.835 | 173.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175.038 | Not specified |
| Pitch | 173.739 | 173.939 |
| Minor | 172.873 | 173.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175 | Not specified |
| Pitch | 173.701 | 173.901 |
| Minor | 172.835 | 173.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175.038 | Not specified |
| Pitch | 173.739 | 173.989 |
| Minor | 172.873 | 173.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175 | Not specified |
| Pitch | 173.701 | 173.951 |
| Minor | 172.835 | 173.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175.038 | Not specified |
| Pitch | 173.739 | 174.054 |
| Minor | 172.873 | 173.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175 | Not specified |
| Pitch | 173.701 | 174.016 |
| Minor | 172.835 | 173.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175.038 | Not specified |
| Pitch | 173.739 | 174.139 |
| Minor | 172.873 | 173.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 175 | Not specified |
| Pitch | 173.701 | 174.101 |
| Minor | 172.835 | 173.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 174.682 | 174.962 |
| Pitch | 173.473 | 173.663 |
| Root d3 | 172.241 | 172.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 174.682 | 174.962 |
| Pitch | 173.545 | 173.663 |
| Root d3 | 172.313 | 172.508 |
Cutting tap preparation
Pre-drill recommendation: 173 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 174.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.