M165 × 4 Metric Thread Dimensions
Nominal diameter 165 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 162.402 mm. Basic minor diameter: 160.67 mm. Basic major diameter: 165 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165 | Not specified |
| Pitch | 162.402 | 162.614 |
| Minor | 160.67 | 161.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165.06 | Not specified |
| Pitch | 162.462 | 162.727 |
| Minor | 160.73 | 161.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165 | Not specified |
| Pitch | 162.402 | 162.667 |
| Minor | 160.67 | 161.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165.06 | Not specified |
| Pitch | 162.462 | 162.797 |
| Minor | 160.73 | 161.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165 | Not specified |
| Pitch | 162.402 | 162.737 |
| Minor | 160.67 | 161.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165.06 | Not specified |
| Pitch | 162.462 | 162.887 |
| Minor | 160.73 | 161.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165 | Not specified |
| Pitch | 162.402 | 162.827 |
| Minor | 160.67 | 161.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165.06 | Not specified |
| Pitch | 162.462 | 162.992 |
| Minor | 160.73 | 161.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165 | Not specified |
| Pitch | 162.402 | 162.932 |
| Minor | 160.67 | 161.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 164.465 | 164.94 |
| Pitch | 162.092 | 162.342 |
| Root d3 | 159.628 | 160.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 164.465 | 164.94 |
| Pitch | 162.182 | 162.342 |
| Root d3 | 159.718 | 160.033 |
Cutting tap preparation
Pre-drill recommendation: 161 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 163.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.