M165 × 3 Metric Thread Dimensions
Nominal diameter 165 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 163.051 mm. Basic minor diameter: 161.752 mm. Basic major diameter: 165 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165 | Not specified |
| Pitch | 163.051 | 163.241 |
| Minor | 161.752 | 162.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165.048 | Not specified |
| Pitch | 163.099 | 163.335 |
| Minor | 161.8 | 162.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165 | Not specified |
| Pitch | 163.051 | 163.287 |
| Minor | 161.752 | 162.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165.048 | Not specified |
| Pitch | 163.099 | 163.399 |
| Minor | 161.8 | 162.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165 | Not specified |
| Pitch | 163.051 | 163.351 |
| Minor | 161.752 | 162.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165.048 | Not specified |
| Pitch | 163.099 | 163.474 |
| Minor | 161.8 | 162.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165 | Not specified |
| Pitch | 163.051 | 163.426 |
| Minor | 161.752 | 162.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165.048 | Not specified |
| Pitch | 163.099 | 163.574 |
| Minor | 161.8 | 162.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 165 | Not specified |
| Pitch | 163.051 | 163.526 |
| Minor | 161.752 | 162.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 164.577 | 164.952 |
| Pitch | 162.779 | 163.003 |
| Root d3 | 160.931 | 161.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 164.577 | 164.952 |
| Pitch | 162.863 | 163.003 |
| Root d3 | 161.015 | 161.271 |
Cutting tap preparation
Pre-drill recommendation: 162 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 163.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.